QXS-312/412 12G System Specifications 19
• “2U12” denotes the 3.5” chassis (with controller or expansion modules)
• The 2U12 chassis ships with 3.5” LFF drives installed.
• Two controller modules or two expansion modules per chassis
• Two power supplies per chassis
QXS-312/412 12G RAID and Expansion Chassis Dimensions
Tab l e 8 provides the 2U12 RAID and expansion chassis dimensions.
QXS-312/412 12G RAID and Expansion Rackmount Chassis
Weights
Tab l e 9 provides the chassis weights for the 2U12 RAID and expansion chassis.
Ta bl e 8 2U12 RAID and Expansion Chassis Dimensions
Specification Metric Unit Imperial Unit
Overall chassis height (2U) 87.9 mm 3.46 in
Width across mounting flange (located on front of chassis) 483 mm 19.01 in
Width across body of chassis 443 mm 17.44 in
Depth from face of mounting flange to back of chassis body 576.8 mm 22.71 in
Depth from face of mounting flange to rearmost chassis extremity 602.9 mm 23.74 in
Depth from face of Ops panel to rearmost chassis extremity 629.6 mm 24.79 in
Note: The 2U12 chassis uses 3.5" LFF drives. Chassis is shipped fully populated with drives installed.
Ta b le 9 2U12 RAID and Expansion Chassis Weights
CRU/Component 2U12 (kg/lb)
Storage chassis (empty) 4.8/10.56
Disk drive carrier 0.9/1.98
Dummy disk drive carrier (air management sled) 0.05/0.11
2U Power Supply Unit (PSU) 3.5/7.7
Controller (module in RAID chassis) 2.6/5.8
Expansion IOM (module in expansion chassis) 1.5/3.3
RAID chassis (fully populated with modules: maximum weight) 32/71
Expansion chassis (fully populated with modules: maximum weight) 28/62
Note 1: Weights shown are nominal, and subject to variances.
Note 2: 2U rail kits add between 2.8 kg (6.2 lb) and 3.4 kg (7.4 lb) to the aggregate chassis
weight.
To Next Page
Loading...
Need help?
General