Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 107 / 247
8 Phonebook Commands
8.1. AT+CNUM Subscriber Number
AT+CNUM can get the subscribers own number (s) from the SIM.
Parameter
AT+CNUM Subscriber Number
Test Command
AT+CNUM=?
Response
OK
Execution Command
AT+CNUM
Response
+CNUM:
[<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc
>]]
[<CR><LF>
+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<servi
ce> [,<itc>]]
[...]]
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
Reference
3GPP 27.007
<alphax> Optional alphanumeric string associated with <numberx>; the used character set
should be the one selected with command Select TE Character Set +CSCS
<numberx> String type phone number of format specified by <typex>
<typex> Type of address of octet in integer format (Refer to 3GPP TS 24.008, subclause
10.5.4.7 for details). Usually, it has three kinds of values:
129 Unknown type
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English