UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 230 / 247
14.6. Summary of CMS ERROR Codes
Final result code +CMS ERROR: <err> indicates an error related to mobile equipment or network. The
operation is similar to ERROR result code. None of the following commands in the same command line is
executed. Neither ERROR nor OK result code shall be returned.
<err> values are mostly used by common message commands:
Table 11: Different Coding Schemes of +CMS ERROR: <err>
SIM Security unspecified error
Unassigned (unallocated) number
Operator determined barring
Short message transfer rejected
Destination out of order (service)
Network out of order (service)
Resource unavailable unspecified
Requested facility not subscribed
To Next Page
Loading...
Need help?
General
