Quectel UG Series

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 169 / 247
11 Supplementary Service Commands
11.1. AT+CCFC Call Forwarding Number and Conditions Control
AT+CCFC allows control of the call forwarding supplementary service according to 3GPP TS 22.082.
Registration, erasure, activation, deactivation and status query are supported.
AT+CCFC Call Forwarding Number and Conditions Control
Test Command
AT+CCFC=?
Response
+CCFC: (list of supported <reads>s)
OK
Write Command
AT+CCFC=<reads>,<mode>[,<numbe
r>[,<type>[,<class>[,<subaddr>[,<sat
ype>[,time]]]]]]
Response
TA controls the call forwarding supplementary service.
Registration, erasure, activation, deactivation, and status
query are supported.
Only <reads> and <mode> should be entered with mode
(0-2,4)
If <mode><>2 and command successful
OK
If <mode>=2 and command successful (only in connection
with <reads> 0-3)
For registered call forwarding numbers:
+CCFC: <status>, <class1>[, <number>, <type>
[,<subaddr>,<satype>[,<time>]]]
[<CR><LF><CR><LF>+CCFC: ....]
OK
If no call forwarding numbers are registered (and therefore all
classes are inactive):
+CCFC: <status>, <class>
OK
where <status>=0 and <class>=15
Quectel
Confidential