Quectel UG Series

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 85 / 247
If network has not synchronized the time, AT+QLTS command will only return OK
Example
AT+QLTS=? //Query supported QLTS mode
+QLTS: (0-2)
OK
AT+QLTS //Query latest time that network synchronized
+QLTS: "14/04/29,06:30:15+32,0"
OK
AT+QLTS=0 //Query latest time that network synchronized. It‟s same as “AT+QLTS”
+QLTS: "14/04/29,06:30:15+32,0"
OK
AT+QLTS=1 //Query current GMT time calculated from the latest time that network synchronized
+QLTS: "14/04/29,06:40:43+32,0"
OK
AT+QLTS=2 //Query current LOCAL time calculated from the latest time network synchronized
+QLTS: "14/04/29,14:41:33+32,0"
OK
6.9. AT+QGPCLASS Change GPRS Multi-slot Class
This command is used to change GPRS multi-slot class
AT+QGPCLASS Change GPRS Multi-slot Class
Test Command
AT+QGPCLASS=?
Response
For UG95
+QGPCLASS: (1-12)
OK
For UG96
+QGPCLASS: (1-12,30-33,35-38)
OK
Quectel
Confidential