Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 240 / 247
ha>]
27
+CSSI: <code1>
Shows the +CSSI intermediate result
code presentation status to the TE
AT+CSSN=1
28
+CSSU: <code2>
Shows the +CSSU unsolicited result
code presentation status to the TE
AT+CSSN=<n>,1
29
+CUSD:
<status>[,<rspstr>,[<dcs>]]
USSD response from the network, or a
network initiated operation
AT+CUSD=1
30
+QSIMSTAT:
1,<inserted_status>
Indicate SIM card inserted or removed
AT+QSIMSTAT=1
31
+CGEV: NW DEACT
<PDP_type>, <PDP_addr>,
[<cid>]
The network has forced a context
deactivation
AT+CGEREP=2,1
32
+CGEV: ME DEACT
<PDP_type>, <PDP_addr>,
[<cid>]
The ME has forced a context
deactivation.
AT+CGEREP=2,1
33
+CGEV: NW DETACH
The network has forced a Packet
Domain detach
AT+CGEREP=2,1
34
+CGEV: ME DETACH
The mobile equipment has forced a
Packet Domain detach
AT+CGEREP=2,1
35
+CGEV: NW CLASS <class>
The network has forced a change of MS
class
AT+CGEREP=2,1
36
+CGEV: ME CLASS <class>
The mobile equipment has forced a
change of MS class
AT+CGEREP=2,1
14.8. Parameter List of AT+CEER
Table 13: Cause and Description List of AT+CEER
Cause
Description
0
No cause information available
1
Unassigned (unallocated) number
3
No route destination
6
Channel unacceptable
8
Operator determined barring
16
Normal call clearing
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English