Quectel UG Series

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 36 / 247
4 Status Control Commands
4.1. AT+CPAS Mobile Equipment Activity Status
AT+CPAS execute command queries the module‟s activity status.
Parameter
Example
AT+CPAS
+CPAS: 0 //Module is idle
AT+CPAS Mobile Equipment Activity Status
Test Command
AT+CPAS=?
Response
+CPAS: (list of supported <pas>s)
OK
Execution Command
AT+CPAS
Response
TA returns the activity status of ME.
+CPAS: <pas>
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
Reference
3GPP TS 27.007
<pas> 0 Ready
2 Unknown
3 Ringing
4 Call in progress or call hold
Quectel
Confidential