Quectel UG Series

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 46 / 247
Parameter
The configuration will be saved to NV automatically.
4.3.8. AT+QCFG="nwscanmode" Network Search Mode Configuration
AT+QCFG="nwscanmode" specifies the mode of searching network. If <effect> is omitted, the
configuration will take effect immediately.
Write Command
AT+QCFG="tone/incoming"[,<value>]
Response
If configuration parameters are omitted:
+QCFG: "tone/incoming",<value>
OK
If configuration parameters are entered:
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Reference
<value> A numeric parameter which indicates ring tone is open or not. The default value is 1.
0 Disable ring tone
1 Enable ring tone
AT+QCFG="nwscanmode" Network Search Mode Configuration
Write Command
AT+QCFG="nwscanmode"[,<scan_m
ode>[,<effect>]]
Response
If configuration parameters are omitted
(+QCFG="nwscanmode"), return current configuration:
+QCFG: "nwscanmode",<scan_mode>
OK
If configuration parameters are entered:
OK
ERROR
If error is related to ME functionality:
NOTE
Quectel
Confidential