Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 44 / 247
The configuration will be saved to NV automatically.
4.3.5. AT+QCFG="urc/ri/other" Ring Line Behavior of Other URCs
AT+QCFG="urc/ri/other" specifies the behavior of ring line when other URCs are presented.
Parameter
is equal to <pulse_duration>
AT+QCFG="urc/ri/other" Ring Line Behavior of Other URCs
Write Command
AT+QCFG="urc/ri/other"[,<typeri>[,<p
ulse_duration>[,<pulse_count>]]]
Response
If configuration parameters are omitted
(+QCFG="urc/ri/other"), return current configuration:
+QCFG:
"urc/ri/other",<typeri>,<pulse_duration>,<pulse_count>
OK
If configuration parameters are entered:
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
<typeri> The behavior of the ring line when URCs are presented
"off" No change. Ring line keeps inactive
"pulse" Pulse. Pulse width determined by <pulse_duration>
<pulse_duration> Set the width of pulse. Value ranges from 1 to 2000ms and the default is
120ms. This parameter is effect only when <typeri> is “pulse”.
<pulse_count> The count of pulse. This parameter is only meaningful when <typeri> is
“pulse”. Value ranges from 1 to 5 and default is 1. The interval time between
two pulses is equal to <pulse_duration>.
NOTE
NOTE
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English