Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 57 / 247
Parameter
Example
AT+QCFG=“stateurc/enable”,1
OK
AT+QCFG=“stateurc/enable”
+QCFG: “stateurc/enable”,1
OK
AT+QCFG=“stateurc/enable”,0
OK
AT+QCFG=“stateurc/enable”
+QCFG: “stateurc/enable”,0
OK
UG95 module does not support this function.
4.3.17. AT+QCFG="sms/listmsgmap" List the Message Map
Write Command
AT+QCFG=“stateurc/enable”,<e
nable_val>
Response
OK
ERROR
<enable_val> Integer type, enable/disable State URC indication
0 Disable
1 Enable
AT+QCFG="sms/listmsgmap" List the Message Map
Test Command
AT+QCFG=?
Response
+QCFG: "sms/listmsgmap",("rec unread","rec read","sto
unsend","sto sent")
OK
Read Command
AT+QCFG?
Response
OK
NOTE
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English