Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 25 / 247
Parameter
2.20. ATS4 Set Response Formatting Character
ATS4 determines the character generated by the module for result code and information text, along with
the command line termination character set via ATS3.
Parameter
2.21. ATS5 Set Command Line Editing Character
ATS5 determines the character value used by the module to delete the immediately preceding character
from the AT command line (i.e. equates to backspace key).
Maximum Response Time
300ms
Reference
V.25ter
<n> 0-13-127 Command line termination character (Default 13=<CR>)
ATS4 Set Response Formatting Character
Read Command
ATS4?
Response
<n>
OK
Write Command
ATS4=<n>
Response
This parameter setting determines the character generated
by the TA for result code and information text.
OK
Maximum Response Time
300ms
Reference
V.25ter
<n> 0-10-127 Response formatting character (Default 10=<LF>)
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English