Quectel UG Series

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 82 / 247
OK
AT+CTZU=1
OK
AT+CTZU?
+CTZU: 1
OK
AT+CTZU=3
OK
AT+CTZU?
+CTZU: 3
OK
The configuration will be saved to NV automatically.
6.7. AT+CTZR Time Zone Reporting
This command controls the time zone reporting of changed event. If reporting is enabled the MT returns
the unsolicited result code +CTZV: <tz>or +CTZE: <tz>,<dst>,<time> whenever the time zone is
changed. The configuration is stored to NV automatically.
AT+CTZR Time Zone Reporting
Test Command
AT+CTZR=?
Response
+CTZR: (0-2)
OK
Write Command
AT+CTZR=<reporting>
Response
OK
ERROR
Read Command
AT+CTZR?
Response
+CTZR: <reporting>
OK
Maximum Response Time
300ms
NOTE
Quectel
Confidential