Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 70 / 247
Parameter
5.7. AT+QCCID Show ICCID
AT+QCCID returns the ICCID (Integrated Circuit Card Identifier) number of the SIM card.
Maximum Response Time
300ms
Reference
3GPP TS 27.007
<command> USIM command number
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
<fileId> Integer type; identifier for an elementary data file on USIM, if used by
<command>
<P1>, <P2>, <P3> Integer type; parameters transferred by the MT to the SIM. These
parameters are mandatory for every command, except GET RESPONSE
and STATUS. The values are described in 3GPP TS 51.011
<data> Information which shall be written to the SIM (hexadecimal character format;
refer to +CSCS)
<pathId> Contains the directory path of an elementary file on a UICC in hexadecimal
format
<sw1>, <sw2> Integer type; information from the SIM about the execution of the actual
command. These parameters are delivered to the TE in both cases, on
successful or failed execution of the command
<response> Response of a successful completion of the command previously issued
(hexadecimal character format; refer to +CSCS). STATUS and GET
RESPONSE return data, which gives information about the current
elementary data field. The information includes the type of file and its size
(refer to 3GPP TS 51.011). After READ BINARY, READ RECORD or
RETRIEVE DATA command the requested data will be returned.
<response> is not returned after a successful UPDATE BINARY, UPDATE
RECORD or SET DATA command
AT+QCCID Show ICCID
Test Command
Response
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English