UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 239 / 247
+CREG:
<stat>[,
<lac>,<ci>[,<Act>]]
After cell neighborhood changing shows
whether the network has currently
indicated the registration of the ME, with
location area code
Indicate network registration status of
the ME
+CGREG:
<stat>[,
<lac>,<ci>[,<Act>]]
After cell neighborhood changing shows
whether the network has currently
indicated network registration status of
the ME, with location area code
Extended time zone reporting
New message is received, and saved to
memory
+CMT:
[<alpha>],<length><CR><LF><p
du>
New short message is received and
output directly to TE (PDU mode)
+CMT:
<oa>,[<alpha>],<scts>[,<tooa>,<
fo>,<pid>,<dcs>,<sca>,<tosca>,
<length>]<CR><LF><data>
New short message is received and
output directly to TE (Text mode)
New CBM is received and output directly
(PDU mode)
+CBM:
<sn>,<mid>,
<dcs>,<pa
ge>,<pag
es>,<CR>,<LF><data>
New CBM is received and output directly
to TE (Text mode)
+CDS:<length>
<CR><
LF><pdu
>
New CDS is received and output directly
(PDU mode)
+CDS:<fo>,<mr>,[<ra>],[<tora>],
<scts>,<dt>,<st>
New CDS is received and output directly
to TE (Text mode)
+COLP:
<number>,<type>,[<subaddr>],[
The presentation of the COL(connected
line) at the TE for a mobile originated
call
+CLIP:
<number>,<type>,[subaddr],[sat
ype],[
<alpha>],<CLI v
al
idit
y>
Mobile terminating call indication
An incoming call is indicated to the TE
with unsolicited result code instead of
the normal RING
+CCWA:
<number>,<type>,<class>[,<alp
To Next Page
Loading...
Need help?
General
