UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 117 / 247
<mem3> to be used for reading, writing, etc.
+CPMS:
<used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Parameter
Example
AT+CPMS="SM","SM","SM" //Set SMS message storage as “SM”
+CPMS: 0,50,0,50,0,50
OK
AT+CPMS? //Query the current SMS message storage
+CPMS: "SM",0,50,"SM",0,50,"SM",0,50
OK
<mem1> Messages to be read and deleted from this memory storage
"BM" Broadcast message storage
"SM" SIM message storage
"SR" Status report storage
<mem2> Messages will be written and sent to this memory storage
"SM" SIM message storage
<mem3> Storage to which received SMs are preferred to be stored (unless forwarded directly to
TE. Refer command New Message Indications +CNMI). Refer to <mem1> for defined
values. Received CBMs are always stored in "BM" (or some manufacturer specific
storage) unless directly forwarded to TE. Received status reports are always stored in
"SR" (or some manufacturer specific storage) unless directly forwarded to TE.
"BM" Broadcast message storage
"SM" SIM message storage
"SR" Status report storage
<usedx> Integer type, number of current messages in <memx>
<totalx> Integer type, total number of messages which can be stored in <memx>
To Next Page
Loading...
Need help?
General
