Quectel UG Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 208 / 247
Parameter
This parameter will not be saved.
Example
AT+QAUDCFG="nau8814/ulgain",90 //Set uplink gain to 90
OK
12.15.12. AT+QAUDCFG="alc5616/dlgain" Set Down Link Gain Level for Codec
alc5616
AT+QAUDCFG=“alc5616/dlgain” is used to set down link gain level for codec alc5616.
Write Command
AT+QAUDCFG="nau8814/ulgain"[,<level>]
Response
If configuration parameters are omitted:
(+QAUDCFG="nau8814/ulgain"),
Return current configuration:
+QAUDCFG: "nau8814/ulgain",<level>
OK
If configuration parameters are entered:
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
<Level> Numeric type, indicates the uplink gain of nau8814, range: 0-100, default: 84
AT+QAUDCFG=“alc5616/dlgain” Set Down Link Gain Level for Codec alc5616
Test Command
AT+QAUDCFG=?
Response
……
+QAUDCFG: "alc5616/ dlgain",<level>
……
OK
NOTES
Quectel
Confidential

Quectel UG Series Specifications

General

Brand	Quectel
Model	UG Series
Category	Control Unit
Language	English