UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 246 / 247
UTRAN configuration unknown
Channel mode unacceptable
Frequency not implemented
Originator leaving call group area
Lower layer failure from network
Semantically incorrect message
Message type non existing
Message type incompatible in state
Conditional information element error
No cell allocation available
Protocol error unspecified
Directed sig conn establishment
Lower layer failure downlink
Lower layer failure uplink
Cell barred due to authentication failure
Signaling connection release
CS connection release triggered by MM
To Next Page
Loading...
Need help?
General
