Quectel UG Series

UMTS/HSPA Module Series
WCDMA UGxx AT Commands Manual
WCDMA_UGxx_AT_Commands_Manual Confidential / Released 39 / 247
(list of supported <ring_no_disturbing>s),
(list of supported <pulse_count>s),
+QCFG: "urc/ri/smsincoming",
(list of supported <typeri>s),
(list of supported <pulse_duration>s),
(list of supported <pulse_count>s),
+QCFG: "urc/ri/other",
(list of supported <typeri>s),
(list of supported <pulse_duration>s),
(list of supported <pulse_count>s),
+QCFG: "urc/delay",
(list of supported <enable>s),
+QCFG: "tone/incoming",
(list of supported <value>s),
+QCFG: "vbatt",
((list of supported <vbatt_type>s),
(list of supported <vbatt_value>s),
(list of supported <vbatt_on_off>s)),
+QCFG: "nwscanmode",
(list of supported <scan_mode>s),
(list of supported <effect>s),
+QCFG: "fota/cid",
(list of supported <contextID>s),
+QCFG: "ussd/textescape",
(list of supported <enable>s)
+QCFG: "sms/textescape",
(list of supported <enable>s),
+QCFG: "remoteip",
(list of supported <remoteIPsel> s),
+QCFG: "ppp/firstreqintr",(1000-10000),
(list of supported <val> s),
+QCFG: “stateurc/enable”,<enable_val>
(list of supported < enable_val >s),
+QCFG:"sms/listmsgmap",("rec unread","rec read","sto
unsend","sto sent")
(list of supported < message type >s),
OK
Maximum Response Time
300ms
Reference
Quectel
Confidential