network operator. If the selected operator is not available, no
other operator shall be selected (except <mode>=4). The
format of selected operator name shall apply to further read
commands (+COPS?).
OK
If error is related to ME functionality:
+CME ERROR: <err>
<stat> 0 Unknown
1 Operator available
2 Current operator
3 Operator forbidden
<oper> Operator in format as per <mode>
<mode> 0 Automatic mode; <oper> field is ignored
1 Manual operator selection; <oper> field shall be present and <Act> optionally
2 Manual deregister from network
3 Set only <format> (for read command +COPS?), do not attempt
registration/deregistration (<oper> and <Act> fields are ignored); this value is not
applicable in read command response
4 Manual/automatic selected, <oper> field shall be presented; if manual selection
fails, automatic mode (<mode>=0) is entered
<format> 0 Long format alphanumeric <oper>; can be up to 16 characters long
1 Short format alphanumeric <oper>
2 Numeric <oper>; GSM location area identification number
<Act> Access technology selected
0 GSM
2 UTRAN
3 GSM W/EGPRS
4 UTRAN W/HSDPA
5 UTRAN W/HSUPA
6 UTRAN W/HSDPA and HSUPA
<Plmn_flag> 0 Available PLMN is present on EHPLMN List
1 Available PLMN is present on User controlled List
2 Available PLMN is present on Operator controlled List
To Next Page
Loading...
