Specifications
QL-800 User Guide 105
Reflective Mark Width (c): 0.75” (19 mm) minimum
Length (d): 0.125” (3.175 mm)
Density: >1.1 (reflective measured with
X-Rite 504) Non-glossy finish
Other Features Gap (e): 0.118” (3.0 mm) - 0.75” (19
mm)
Multi-Across/Down: Yes, 1.0” (25 mm)
min. width, 1.0” (25 mm) min. length
Maximum of 0.25” horizontal and verti-
cal gaps
Butt Cut Label Construction: acceptable
if no print required for length of reflective
mark
Splices: clear tape splices are permissi-
ble
Label
To Next Page
Loading...