QL-800 Maintenance Utility
62 QL-800 User Guide
Replacing the Maintenance Roller
Use the following procedure to replace the maintenance roller.
Note: Wear protective gloves to prevent ink from staining your hands during this
procedure.
1 Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
QL-800 > QL-800 Maintenance Utility. A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose
OK.
2 Choose the Parts Replacement tab.
3 Select Maintenance Roller. Then choose Start. Follow the on-screen instructions
to complete this procedure.
Advanced Tab
The Advanced tab is reserved for use only by Technical Support.
To Next Page
Loading...