Getting Started
QL-800 User Guide 11
Changing Printer Networking Settings
You can view and change printer networking settings with the QL-800 Toolbox
application. This application is available in the following situations:
• Your PC is connected to the printer via USB and the driver software has been
installed for USB printing.
• Your PC is connected to the printer via the network and the driver software has
been installed for network printing.
The QL-800 Toolbox application allows you to enable/disable DHCP and change the
IP address of the printer.
Note: Some QL-800 Toolbox features are not supported. Use only the features
described in this procedure.
1 Open the QL-800 Toolbox application from a PC connected to the printer via USB.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
QL-800 > Toolbox.
A web browser will open and display the QL-800 Toolbox application.
2 Choose the Diagnostics link to display the Diagnostics information.
The IP address for the printer is displayed on this page. Note the IP address for
reference purposes.
3 If the IP address does not appear, or you would like to change the IP address,
choose the Network Config link. Network configuration information will be
displayed.
• If you would like to automatically assign a new IP address based on DHCP,
select the dhcp and autoip options. Then choose Submit.
• If you would like to assign a specific IP address, ensure the dhcp and autoip
options are not checked. Enter the new IP address in the ip_address field and
choose Submit.
4 Choose the Diagnostics link to return to the Diagnostics information. Confirm the
network settings before exiting the application.
Close the web browser to exit the QL-800 Toolbox application.
To Next Page
Loading...
Need help?
General