RadioLink AT10 User Manual

58
GLIDER MODEL FUNCTIONS
Please note that nearly all of the
BASIC
menu functions are the same for airplane (
ACRO
setup), sailplane (
GLID 1A+1F

2A+1F

2A+2F
setups), and helicopter (
HELI
setups). The features that are identical refer back to the
ACRO
chapter. The glider
BASIC
menu includes
MOTOR CUT
and does not include
IDLE-DOWN
or
THR-CUT
.
Note that in all cases where
ACRO
programming labels channel 3 as throttle,
GLID
programming labels channel 3 as
ARB
(airbrake), since airbrakes are normally operated on channel 3 in gliders. This includes
STK-THR
reading
STK-ARB
.
GLIDER (
GLID(1A+1F)

(2A+1F)

(2A+2F)
) FUNCTIONS . 58
Table of contents........................................................ 58
Getting Started with a Basic 4-CH Glider ................ 59
GLIDER
BASIC
MENU FUNCTIONS .......................... 61
MOTOR CUT
................................................................ 62
MODEL
Submenu:
MODEL SELECT
,
COPY
,
NAME
.......... 20
PARAMETER
Submenu:
RESET
,
MODUL
,
ATL
,
AILE-2
,
CONTRAST
,
BACK-LIGHT
,
USER NAME
,
LOGIC SW
........ 23
Model type (
PARAMETER
submenu) ........................... 61
Servo
REVERSE
........................................................... 26
END POINT
.................................................................. 27
'XDO7ULSOH5DWHVDQG([SRQHQWLDO
D/R
,
EXP
).......... 30
TIMER
Submenu.......................................................... 33
Auxiliary Channel assignments and CH9 reverse (
AUX-
CH
)............................................................................. 34
TRAINER
..................................................................... 34
TRIM
and
SUB-TRIM
................................................... 35
SERVO
Display ........................................................... 37
Fail Safe and Battery FailSafe (
F/S
)......................... 37
GLIDER
ADVANCE
MENU FUNCTIONS ..................... 62
FLAPERON
................................................................... 39
FLAP TRIM
.................................................................. 40
Aileron Differential (
AILE-DIFF
)................................. 41
ELEVON
(see tail types) ............................................... 43
ELEVON
....................................................................... 43
V-TAIL
......................................................................... 45
Linear,
Prog. mixes
1-4 ............................................. 53
Curve,
Prog. mixes
5-8 ............................................. 55
ELEV-FLAP
.................................................................... 48
BUTTERFLY
(modifyed version of
AIRBRAKE
)............. 48
BUTTERFLY
................................................................... 48
AILE/RUDD
.................................................................. 63
AILE-FLAP
(
GLID(2A+2F)
only) .................................... 64
SPOILER MIX
............................................................... 64
OFFSETs
$GGLWLRQDOÀLJKWFRQGLWLRQV...................... 65
START DELAY
(
GLID(1A+1F)
only)................................. 66
CAMBER MIX
............................................................... 67
CAMBER FLAP
.............................................................. 67
Channel 3’s function selection (
CONDITION/FUNCTION
) 69

RadioLink AT10 Specifications

General

Channels	10
Frequency	2.4GHz
Output Signal	PPM
Control Distance	1.5km
Compatibility	Compatible with most multi-rotor, airplane, helicopter and car models