Radyne ComStream SFC6400A - Error Messages

Appendix A SFC6400A/SFC1450A Synthesized Frequency Upconverter
A-24 TM106 – Rev. 1.1
DAC Value = dddd {dddd = DAC Value}
<cr><lf>
<cr><lf> {End of transmission}
A.37 Error Messages
Bad address
<cr><lf>
INVALID ADDRESS
<cr><lf>
<cr><lf> {End of transmission}
Bad command
<cr><lf>
ILLEGAL COMMAND
<cr><lf>
<cr><lf> {End of transmission}
Not in backup 1 to 1
<cr><lf>
Command is not valid for the backup converter
<cr><lf> {End of transmission}
Not in backup 1 - 8
<cr><lf>
Command is not valid for the backup converter
in a 1 for 8 configuration
<cr><lf> {End of transmission}
Only in backup 1 - 8
<cr><lf>
Command is ONLY valid for the backup converter
in a 1 for 8 configuration
<cr><lf> {End of transmission}
Only in backup 1 to 1
<cr><lf>
Command is ONLY valid in a 1 for 1 switch configuration
<cr><lf> {End of transmission}
Only in backup
<cr><lf>
Command is ONLY valid for the backup converter
<cr><lf> {End of transmission}