Radyne ComStream SFC6400A - Changing the Logon Password; Exiting SNMP Configuration; Logging off; Logging on

SFC6400A/SFC1450A Synthesized Frequency Upconverter User Interfaces
TM106 – Rev. 1.1 4-39
4.6.2.3 Exiting SNMP Configuration
1. Select the Main Menu by pressing ‘1’ followed by <ENTER>, to go back to the top-level
Menu screen.
4.6.2.4 Logging On
1. The user must be logged on to have access to SNMP Features. To log on the SNMP
configuration, press ‘50’ followed by <ENTER> to open the Logon Dialog Box.
+ - - - - - - - - - - - - - - - - - - | Logon | - - - - - - - - - - - - - - - - - - - - - -+
| |
| 1.User ID : |
| 2.Password : |
| 3.OK 4.CANCEL |
| |
+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
2. In the User ID Text Box, enter “Oper-md5” (case sensitive).
3. In the Password Text Box, enter “Oper” (case sensitive).
4. Select OK
4.6.2.5 Changing the Logon Password
To change the password, logged on so that the “SNMP/Security” selection appears. Press ‘54’
followed by <ENTER> to open the Change Logon Password dialog.
+ - - - - - - - - - - - - - | Change Password | - - - - - - - - - - - - - - - - - -+
| |
| 1.Old Password: |
| 2.New Password: |
| 3.Re-enter New Password: |
| 4.OK 5.CANCEL |
| |
+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
1. In the Old Password Text Box, enter “Oper” (case sensitive).
2. In the New Password Text Box, enter the new password (case sensitive, only *’s appear for
security).
3. Re-enter the new password to verify the desired setting.
4. Select OK
4.6.2.6 Logging Off
1. To log off the SNMP Configuration, press ‘51’ followed by <ENTER>. The following
confirmation message will be displayed to avoid inadvertent exits:
You will be logged off. Are you sure? (Y/N):