Radyne ComStream SFC6400A - Environmental Characteristics; LED Indicators; Physical Characteristics; Switch Settings

Technical Specifications SFC6400A/SFC1450A Synthesized Frequency Upconverter
7-4 TM106 – Rev. 1.1
Converter and Frequency Type
Terminal Emulation and Baud Rate
RF Detector
IF Detector and DAC Attenuation Voltages
7.6.2 Switch Settings
Monitored and/or controlled from Priority
the Front Panel or remotely using All Available Prime Summary Fault
the RS-232/RS-485 or Ethernet Fault Delay
remote port (backup only): All Available Prime Learn Status
Force Backup
All Available Prime Backup Test Status
Learn Control
All Available Prime Configuration Change Status
Backup Testing
All Available Prime Relay Status
Compensation Control
All Available Prime Converter Types
7.6.3 LED Indicators
Standby
LO Fault
Signal Fault
External Reference Online
Backup
Software Fault
Manual (Backup Only)
Power
Fault
Event
Remote
7.7 Physical Characteristics
Size: 19.0" x 1.73" x 21.0" Deep
(48.26 cm x 4.44 cm x 48.26 cm)
Weight: 12 lb. (5.44 kg)
Primary Power: 100 - 240 VAC, 50 - 60 Hz, 1.0 A
Power Consumption: 50 Watts
7.8 Environmental Characteristics
Temperature: 0 to 50°C
Humidity: To 95% Non-Condensing
Altitude: To 8,000 ft. (2438 m) AMSL
Shock & Vibration: No loss of frame synchronization at the BER Test Set due
to a standard hammer drop test on any outside surface of
the converter. Likewise, no loss of frame synchronization
for temperature gradients of ± 22°C/Hr.
Storage Temperature: -32 to +65°C, to 99% Non-Condensing