Radyne ComStream SFC6400A - Page 128

SFC6400A/SFC1450A Synthesized Frequency Upconverter Appendix B
TM106 – Rev. 1.1 B-11
Opcode: <3037h> Command set converter compensation
<2>
<1>
Prime
Compensation
Prime To
Compensate
Note: Command is only valid in Chain-Switching Mode.
Binary value, one implied decimal point
1 - 8, converter must be present
Opcode: <3038h> Command set all converter compensations
<2>
<2>
<2>
<2>
<2>
<2>
<2>
<2>
Prime 1
Compensation
Prime 2
Compensation
Prime 3
Compensation
Prime 4
Compensation
Prime 5
Compensation
Prime 6
Compensation
Prime 7
Compensation
Prime 8
Compensation
Note: Command is only valid in Chain-Switching Mode
Binary value, one implied decimal point
Binary value, one implied decimal point
Binary value, one implied decimal point
Binary value, one implied decimal point
Binary value, one implied decimal point
Binary value, one implied decimal point
Binary value, one implied decimal point
Binary value, one implied decimal point
Opcode: <3039h> Command set converter priority
<1>
<1>
Prime Priority
Prime Number
0 - 8 (0 means not part of the backup pool)
1 - 8, converter must be present