Radyne ComStream SFC6400A - Page 97

SFC6400A/SFC1450A Synthesized Frequency Upconverter Appendix A
TM106 – Rev. 1.1 A-7
A backup converter in a 1:1 Switch Configuration will return the following string of information:
<cr><lf>
Converter Configuration: One for One Backup
Switch Configuration: {Manually Selected/Manually De-Selected/Auto}
Status: {Faulted, Offline, Warming up/Faulted,
Offline/Setup/Online/Standby}
Channel: cc {cc = current channel number, 01 to 30}
Frequency: ffff.fff {ffff.fff = frequency in MHz}
Gain: sgg.g {s = ± and gg.g = gain in dB}
Input Atten: aa dB {aa = input attenuation}
Backup RF: {Off/On}
Stored Faults: {None/Signal Fault/LO Fault/LO Fault, Signal Fault}
Backup Reference: {Internal/External}
<cr><lf>
Switch Faults: {None/Prime converter not learned/Prime converter polling
error}
<cr><lf> {End of transmission}
A primary converter in a 1:8 Switch configuration will return the following string of information:
<cr><lf>
Switch Configuration: One for Eight
Primary Converter Number n {n = primary converter number}
Status: {Faulted, Warming up/Faulted/Available
Channel: cc {cc = current channel number, 01 to 30}
Frequency: ffff.fff {ffff.fff = frequency in MHz}
Gain: sgg.g {s = ± and gg.g = gain in dB}
Input Atten: aa dB {aa = input attenuation}
RF: {Off/On}
Stored Faults: {None/Signal Fault/LO Fault/LO Fault, Signal Fault}
Reference: {Internal/External}
<cr><lf> {End of transmission}
A backup converter in a 1:8 Switch Configuration will return the following string of information:
<cr><lf>
backup converter in a One for Eight switch configuration
Hot Converter: n Frequency: ffff.fff Gain: sgg.g Input Atten: aa dB
{n = hot converter number} {ffff.fff = frequency in MHz}
{s = ± and gg.g = gain in dB} {aa = input attenuation}
Backup Reference: {Internal/External}
Backup RF: {Off/On}
Backup Stored Faults: {None/Signal Fault/LO Fault/LO Fault, Signal Fault}
<cr><lf>
Prime 1 is {not selected/Online with a Priority = n/Online and Faulted
with a Priority = n/Offline and Faulted with a Priority =
n/Offline and Available with a Priority = n}
{n = priority number, 0 - 8}
Prime 2 is {not selected/Online with a Priority = n/Online and Faulted
with a Priority = n/Offline and Faulted with a Priority =
n/Offline and Available with a Priority = n}