RaiseTouch User Manual Date:03/03/2020
- 54 / 80 -
www.raise3d.com
3. RaiseTouch and ideaMaker need to be upgraded to the latest version at the same time.
1.5.2.3 Resolution and Frame Rate settings
Click “Settings” to enter the camera parameter setting interface, click “Resolution Settings” to enter
the resolution parameter setting interface.
Resolution Settings
Click on “Resolution” to enter the resolution list and select the appropriate resolution as needed.
Click on “Frame Rate” to modify the number of frames.
Select Resolution
Note:
In order not to affect the use and printing effect of other network devices, the maximum frame
rate is not allowed to exceed 10 fps.
To Next Page
Loading...
