R&S EM510 - Page 102

EM510 SENSe Subsystem :DETector
4065.7763.32-01.00 5.66
. :FM
. . :RDS[:STATe] 0|1|ON|OFF
Switching on or off the RDS decoder.
Note:
The RDS decoder is accessible only with installed software option EM510IM (ITU Measurement).
Parameters:
ON|1 Decoder switched on
OFF|0 Decoder switched off
*RST state:
0
Example:
FM:RDS ON
. . :RDS[:STATe]?
Query about the state of the RDS decoder
Parameters:
none
Result:
1 Decoder switched on
0 Decoder switched off
Example:
FM:RDS?  1