R&S EM510 - Product Overview and Characteristics; EM510 Usage and Modes

Characteristics EM510
2.1 4065.7763.32-01.00
2 Characteristics
2.1 Use
The EM510 is designed to cover the frequency range of 9 kHz to 32 MHz. It is made up of a compact
case, power supply modules and the HF receiver module.
The EM510 is controlled via the LAN interface (TCP/IP) based on the SCPI (Standard Commands for
Programmable Instruments) syntax.
It operates in the following modes:
 Fixed Frequency Mode (FFM)
 Memory Scan
 Frequency Scan
 Panorama Scan (option)
 Test
Data output is possible in the following formats:
 Baseband signal (I and Q) in digital form at
– LAN (B
max
= 1 MHz)
– FPDP (B
max
= 10 MHz)
 IF analog GC, variable center frequency 0 to 21.4 MHz, 2 channels or Video analog, DC to BW/2, 2
channels (AM/FM or I/Q)
 Video digital via LAN 2 channels
AM/FM (BW
max
= 250 kHz) or I/Q (BW
max
= 500 kHz)
 AES3 for recording digital AF data streams
 AF digital via LAN
 AF analog (600 line and headphones)
The EM510 is designed for bench top use. It is also well-suited for mounting in a rack environment.