Remote Control via LAN EM510
5.135 4065.7763.32-01.00
5.5.3.4 STATus:OPERation Register
In the CONDition section, this register contains information about the type of actions currently being
executed by the device. In the EVENt section, it also contains information about the type of actions
having been executed since the last reading. It can be read using the commands
"STATus:OPERation:CONDition?" or
"STATus:OPERation[:EVENt]?".
Table 5-3: Bit allocation of STATus:OPERation register
Bit No. Meaning
3 SWEeping
This bit is set if the summary bit of the STATus:OPERation:SWEeping bits is set.
4 MEASuring
This bit is set as long as a measurement is carried out.
8 TESTing
This bit is set if the self-test has been triggered.
11 BLANking
This bit is set if the blanking input has been activated
12 Muting
This bit is set if the blanking input has been activated
To Next Page
Loading...
