R&S EM510 - SENSe Subsystem: Signal Analysis

EM510 SENSe Subsystem
4065.7763.32-01.00 5.58
5.3.15 SENSe Subsystem
[SENSe]
. :BANDwidth|BWIDth
. . [:RESolution] <numeric_value>|UP|DOWN|MINimum|MAXimum
Selection of demodulation bandwidth.
Since in the EM510 the signal path is also used for the computation of the IF panorama, both the
selection of the IF panorama and the selected demodulation bandwidth affect the selection of the
preselection filter ranges. The broader frequency range determines the selection of the preselection
filter range.
Parameters:
<numeric_value> value of bandwidth
UP|DOWN to next|previous bandwidth
MINimum|MAXimum sets the narrowest|widest bandwidth
*RST state:
9 kHz
Example:
BANDwidth 2.4 kHz
. . [:RESolution]? [MINimum|MAXimum]
Query about the current demodulation bandwidth.
Parameters:
none query about the current bandwidth
MINimum|MAXimum query about the narrowest|widest bandwidth
Result:
IF bandwidth in Hz without unit specified
Example:
BANDwidth? -> 2400