R&S EM510 - Page 138

EM510 STATus Subsystem
4065.7763.32-01.00 5.102
. . :PTRansition <numeric_value>
Setting the positive transition filter of the OPERation status register.
Parameters:
<numeric_value> value of the PTRansition section (0..65535 or
#H0000..#HFFFF or #B0..#B1111111111111111)
*RST state:
will not be changed by *RST
Example:
STATus:OPERation:PTRansition #B11111111
. . :PTRansition?
Query about the positive transition filter of the OPERation status register.
Parameters:
none
Result:
Depending on the setting by the FORMat:SREGister command, the contents of the register are
transferred as a decimal, binary or hexadecimal value in ASCII code.
Example:
STATus:OPERation:PTRansition? -> 255
Other STATus commands described below do not directly influence the STATus registers.