R&S FSH series User Manual

73
E-02
The current attenuation value of the attenuator
is displayed in the input fi eld. This value can be
changed with the rotary knob or the cursor keys
in 5 dB steps within the 0 dB to 40 dB range. The
desired value can also be entered directly via the
numeric keypad.
 Confi rm the input of the attenuation value with
ENTER.
GalaxyE_v1-10_3.indd 73GalaxyE_v1-10_3.indd 73 08.04.2009 15:21:4608.04.2009 15:21:46

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)