R&S FSH series User Manual

79
E-02
The R&S FSH has markers for reading off signal
levels and frequencies. Markers are always
positioned on the trace. Both the level and
frequency at their current positions are displayed
on the screen.
 Press the marker key.
The marker is activated and is automatically
positioned on the trace maximum. A vertical line
on the measurement diagram indicates the marker
frequency. A short horizontal line on the trace
indicates the level.
The R&S FSH displays the level and the frequency
of the marker position numerically above the
measuring screen.
GalaxyE_v1-10_3.indd 79GalaxyE_v1-10_3.indd 79 08.04.2009 15:21:4808.04.2009 15:21:48

R&S FSH series Specifications

General

Input Impedance	50 Ω
Display	640 x 480 pixels
Tracking generator	Optional
Interfaces	USB, LAN
Third Order Intercept (TOI)	+15 dBm typical
Input VSWR	≤1.5:1 (typical)
Input Connector	N (f)
Power Supply	100 V to 240 V
Frequency range	9 kHz to 3.6/8/13.6/20 GHz
Battery life	Approx. 4 hours (standard battery)