7
E-02
be used for replacing parts relevant to safety
(e.g. power switches, power transformers,
fuses, batteries). A safety test must always be
performed after parts relevant to safety have
been replaced (visual inspection, PE conductor
test, insulation resistance measurement,
leakage current measurement, functional test).
As with all industrially manufactured goods, 3.
the use of substances that induce an allergic
reaction (allergens, e.g. nickel) such as
aluminum cannot be generally excluded. If you
develop an allergic reaction (such as a skin
rash, frequent sneezing, red eyes or respiratory
diffi culties), consult a physician immediately to
determine the cause.
If products/components are mechanically and/4.
or thermically processed in a manner that
goes beyond their intended use, hazardous
substances (heavy-metal dust such as lead,
beryllium, nickel) may be released. For this
reason, the product may only be disassembled,
e.g. for disposal purposes, by specially trained
personnel. Improper disassembly may be
hazardous to your health. National waste
disposal regulations must be observed.
Depending on the function, certain products 5.
such as RF radio equipment can produce an
elevated level of electromagnetic radiation.
Considering that unborn life requires increased
protection, pregnant women should be
protected by appropriate measures. Persons
with pacemakers may also be endangered
GalaxyE_v1-10_3.indd 7GalaxyE_v1-10_3.indd 7 08.04.2009 15:21:3708.04.2009 15:21:37
To Next Page
Loading...
Need help?
General
