Chapter 4: Quick Start
27
Using the Channel Selection Menu
You must use the OSD hot key to trigger the OSD. The default hot key is
'Scroll Lock.'
To change the hot key, see
System Settings
(on page 38).
To select a channel via the Selection Menu:
1. Press 'Scroll Lock' 3 times. The Selection Menu appears, showing a
list of channels.
2. If the desired channel is not shown on the current page, press Page
Down or Page Up.
3. Press
or to select one of the "active" channels, and press
Enter.
Channels with channel names displayed are "active" channels.
The default name is 'PC'. See
Active and Inactive Channels
(on
page 45).
Th
e chan
nel that is connected to a MCD switch is marked with +.
See
Establishing a Two-Tier System
(on page 49).
4. The Selection Menu disappears. The video of the accessed server
displays onscreen. Now you can control the server with the keyboard
and mouse.
If you select a channel where a 2nd-tier switch is connected, the
OSD Selection Menu of that switch displays for you to select its
channels.
To Next Page
Loading...
Need help?
General
