Chapter 5: Using the On-Screen Display Interface
43
: Brightness
: Contrast
5. Press
or to adjust the value after the cursor is located in the
desired video property.
6. Press Esc to save the changes and exit.
Viewing Firmware Version
You can check the current versions of OSD and USB driver implemented
on the MCD to determine whether it is necessary to update your MCD.
See
Firmware Upgrade
(on page 62).
To view the current firmware version:
1. If the OSD is not displayed, press the hot key 3 times.
The default hot key is 'Scroll Lock.' To change it, see
System
Settings
(on page 38).
2. On the Selection Menu, press F5. The firmware information displays.
3. To exit, press Esc.
To Next Page
Loading...
Need help?
General
