Raritan MCD-LED17 series - Page 60

Chapter 6: Two-Tier System
54
 If the desired 2nd-tier switch is not listed on the current page,
press Page Down or Page Up.
3. Press Enter. The Selection Menu of the selected 2nd-tier switch
appears, showing a list of 2nd-tier channels.
 To identify a 2nd-tier switch's Selection Menu, see
Selection
Menu
(on page 31).
4. Select the desired channel and press Enter.
5. The video of the selected channel displays on the screen, with its
channel ID shown for seconds. See
Channel ID (on page 33).
 Now you can view or control the server being accessed.
To return to the base switch from a 2nd-tier channel:
1. If the OSD is not displayed, press the hot key 3 times.
2. On the Selection Menu, press the letter 'R'.
 You can press the uppercase 'R' or lowercase 'r' because this hot
key is NOT case sensitive.
3. The Selection Menu of the base switch appears, showing a list of the
base switch's channels.