Chapter 3: Using the Web Interface
External Beeper
After connecting and detecting a supported external beeper, the BCM2
shows 'External Beeper' in place of 'Feature Port' in the menu.
Note: For connection instructions, see
Connecting an External Beeper
(on page 78).
To open the External Beeper page, click it in the Menu. This page shows
an external beeper's status, including:
• Number of the FEATURE port where this external beeper is
connected
• Its device type
• Its connection status
• The beeper's state - off or active
For the functionality of this icon on the top-right corner, see
Feature
Port
(on page 134).
To Next Page
Loading...
