Chapter 3: Using the Web Interface
When there are more than 5 pages and the page numbers listed
does not show the desired one, click to have the bar
show the next or previous five page numbers, if available.
5. If wanted, you can resort the list by clicking the desired column
header. See Sorting a List.
To clear the local log:
1. Click on the top-right corner.
2. Click Clear Log on the confirmation message.
Updating the BCM2 Firmware
Firmware files are available on Raritan website's
Support page
(
http://www.raritan.com/support/
).
When performing the firmware upgrade, the BCM2 keeps each outlet's
power status unchanged so no server operation is interrupted. During
and after the firmware upgrade, outlets that have been powered on prior
to the firmware upgrade remain powered ON and outlets that have been
powered off remain powered OFF.
You must be the administrator or a user with the Firmware Update
permission to update the BCM2 firmware.
Before starting the upgrade, read the release notes downloaded from
the Raritan website's
Support page
(
http://www.raritan.com/support/
).
If you have any questions or concerns about the upgrade, contact Raritan
Technical Support BEFORE upgrading.
On a multi-inlet PDU (any model with X2 or X3 suffixes), all inlets must
be connected to power for the PDU to successfully upgrade its firmware.
Note that firmware upgrade via iOS mobile devices, such as iPad,
requires the use of iCloud Drive or a file manager app.
Warning: Do NOT perform the firmware upgrade over a wireless
network connection.
Important: If you are upgrading an existing cascading chain from a
"pre-3.3.10" firmware version, you must follow the
Upgrade
Guidelines for Existing Cascading Chains
(on page 316).
To update the firmware:
1. Choose Maintenance > Update Firmware.
To Next Page
Loading...
