Raritan PMC-1000 - Existing Roles; Serial Port Settings; Energywise Settings

Chapter 5: Using the Command Line Interface
375
Existing Roles
This command shows the data of one or all existing roles.
#
show roles <role_name>
Variables:
• <role_name> is the name of the role whose permissions you want to
query. The variable can be one of the following options:
Option
Description
all This option shows all existing roles.
Tip: You can also type the command
without adding this option "all" to get the
same data.
a specific role's name This option shows the data of the specified
role only.
Displayed information:
• Role settings are displayed, including the role description and
privileges.
Serial Port Settings
This command shows the baud rate setting of the serial port labeled
CONSOLE / MODEM on the BCM2 device.
#
show serial
EnergyWise Settings
This command shows the BCM2 device's current configuration for Cisco
®
EnergyWise.
#
show energywise