Raritan PMC-1000 - Vendor-Specific Attributes; NPS VSA Illustration

Appendix D: RADIUS Configuration Illustration
554
steve Cleartext-Password := "test123"
Filter-ID = "Raritan:G{Admin}",
Filter-ID = "Raritan:G{SystemTester}"
Vendor-Specific Attributes
You must specify the following properties when using a RADIUS
vendor-specific attribute (VSA).
• Vendor code = 13742
• Vendor-assigned attribute number = 26
• Attribute format = String
The syntax of the vendor-specific attribute for specifying one or multiple
roles is:
Raritan:G{role-name1 role-name2 role-name3}
For configuration on NPS, see NPS VSA Illustration (on page 554).
For configuration on FreeRADIUS, see FreeRADIUS VSA Illustration (on
page
566).
NPS VSA Illustration
To configure Windows 2008 NPS with the vendor-specific attribute , you
must:
a. Add your BCM2 to NPS. See Step A: Add Your BCM2 as a RADIUS
Client (on page 536).
b. On the NPS, configure connection request policies and the
vendor-specific attribute. See
Step B: Configure Connection
Policies and Vendor-Specific Attributes (on page 559).
Some configuration associated with Microsoft Active Directory (AD) is
also required for RADIUS authentication. See
AD-Related Configuration
(on page
567).