Raritan PMC-1000 - Page 44

Chapter 1: Installation and Initial Configuration
32
Configure Panel Mains Circuit
1
Enter a name.
2
Select the circuit type:
 Single Phase
 Split Phase
 3-phase
3
Enter the number of circuit
positions in the panel.
Select the panel layout: one or
two columns.
Select the circuit position
numbering style: sequential
or odd/even.
4
Enter the current rating
(circuit breaker rating) of the
circuit.
5
Select the checkbox for each
CT installed.
Enter the CT rating. Ratings
are marked on the CT.
6
Click OK.