Raritan PMC-1000 - Page 577

Appendix D: RADIUS Configuration Illustration
565
Note: If your BCM2 uses PAP, then select "PAP."
10. Select Vendor Specific to the left of the dialog, and click Add. The
Add Vendor Specific Attribute dialog appears.
11. Select Custom in the Vendor field, and click Add. The Attribute
Information dialog appears.
12. Click Add, and the Vendor-Specific Attribute Information dialog
appears.
13. Click "Enter Vendor Code" and type
13742 .
14. Select "Yes, it conforms" to indicate that the custom attribute
conforms to the RADIUS Request For Comment (RFC).
15. Click Configure Attribute, and then:
a. Type 26 in the "Vendor-assigned attribute number" field.
b. Select String in the "Attribute format" field.
c. Type
Raritan:G{Admin User SystemTester} in the "Attribute
value" field. In this example, three roles 'Admin,' 'User' and
'SystemTester' are specified inside the curved brackets {}.