AXIS-H EMC
Remove the gear unit
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page
2
of
2
04.11.2014
Chapter 540
Disassemble the disc speed sensor or
disconnect the connector at the cable
harness
CAUTION! During disassembly of the disc
speed sensor, gear oil may escape from the
gearbox.
Disconnect the return tube and the
pressure tube. It may be necessary to
release the clamp to disassemble the
pressure tube
Untighten the retention screws of the
gearbox at the gearbox crossbeam and
take off the gearbox downwards
The gear unit can now be disassembled or
replaced
To Next Page
Loading...
