Rauch AXIS H EMC Series - 801_20140218_Guide-2057683_EN(UK)

ISOBUS basic equipment
Tractor installation cable 2057683
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page 1
of 3
29.10.2014
Chapter 801
1. CCI (applies for all ISOBUS devices)
Cable harness
2057683
Bus termination 2057684
at CAN-1 OUT.
Bus connection
2057684
The bus termination
must be connected!
Direct connection to
CAN-1 IN
! If the bus termination is not
connected, the relays will not
establish the power supply of
12V!