Rauch AXIS H EMC Series - Setting the Working Width; Selecting the Correct Spreading Disc

AXIS-H EMC/AXIS-H EMC+W
Machine options >SW 3.00.00
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page 1
of 4
27.10.2014
Chapter 471
 As of software > 3.00.00
Machine options: Settings and explanations
 In the machine options, the spreader is configured
• After an update, the machine options need to be checked.
• After replacement of the implement ECU, the machine options need to be
configured.
(Figures refer to AXIS-H 30.1 EMC with CCI terminal)
RAUCH/KUHN: Here, the spreader logo is
changed according to the respective make.