Service information
AXIS-H EMC+W
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page
1
of
4
27.10.2014
Chapter 450
1. Recalibration of weigh cells
2. Application of calibration values
3. Checking the calibration
Preparation:
Battery voltage acceptable and/or tractor is running
Empty hopper
Spreader horizontally installed at the tractor
Weight >500kg
1. recalibration of weigh cells
(when replacing weigh cells, recalibration)
(Figures refer to AXIS-H 30.1 EMC with CCI terminal)
Enter code 3354
To Next Page
Loading...
